Storing Frames On Site

Once frames are completed, most frame fabricators will deliver frames to site. Ideally these should be stacked in the approximate order they will be installed however frequently the order will be determined based on what is best for transport.

It is important to coordinate with the manufacturer to agree which sets of frames will be delivered and in which location they will be stored. If frame order stacking is critical, discuss with manufacturer prior.

LGS frames should be stored in an area that will protect them from damage caused by other site activities. They can remain uncovered for short periods in most instances, but they need to be stored flat. In instances of undulating ground, the frames should be packed off the ground and kept straight. Keeping stacked frames packed and elevated also protects from water immersion and contaminants.

The manufacturer will provide detailed site drawings that show the location of every frame. All frames will be branded to identify their purpose and location.

Check also that you have evidence (either printing on the frame or supporting certification) that the steel conforms to the requirements of AS1397. The NASH Advisory Note NAN 006 (in the resources section below) provides an excellent summary of what to look for when ordering, manufacturing, test certificates, packaging and various Standards requirements.